Unitronics
Snap-in I/O liitäntämoduli
V200-18-E3XB Expansion Module
623,28 € / myyntieräMyyntierä sis. 1 KPLVertailuhinta 623,28 / 1KPL
Varastossa
V200-18-E3XB kytketään suoraan yhteensopivien Unitronics OPLC:ien takaosaan, jolloin syntyy itsenäinen PLC-yksikkö, jossa on paikallinen I/O-kokoonpano.
- 18 eristettyä digitaalista tuloa, sisältää 2 H.S.C.-tuloa, tyyppi pnp/npn (source/sink)
- 15 eristettyä relelähtöä
- 2 eristettyä pnp/npn (source/sink) transistorilähtöä, sisältää 2 H.S.-lähtöä.
- 4 eristettyä analogista/PT100/TC-tuloa
- 4 eristettyä analogista lähtöä
Paino | 0,48 kg (kilogramma) |
---|
Digital Inputs:
Number of inputs: 18 (in two groups)
Input type: pnp (source) or npn (sink)
Nominal input voltage: 24V DC
Response time: 10mSec typical
Resolution: 32-bit
Relay Outputs:
Number of outputs: 15 relays (in two groups)
Output type: SPST-NO
Type of relay: Tyco PCN-124D3MHZ or compatible
Output current: 3A maximum per output (resistive load)
Output current: 8A maximum total for common (resistive load)
Rate voltage: 250VAC / 30VDC
Response time: 10mS (typical)
Transistor Outputs:
Number of outputs: 2, high-speed (Each can be individually set as pnp (source) or npn (sink) via wiring and jumper settings)
Output type (pnp): P-MOSFET (open drain)
Output type (npn): N-MOSFET (open drain)
Output current (pnp): 0.5A maximum per output
Output current (npn): 50mA maximum per output
Short circuit protection: yes (pnp only)
Analog I/O’s Power Supply:
Nominal operating voltage: 24V DC
Operating voltage: 20.4 to 28.8VDC
Analog/ PT100/ TC Inputs:
Number of inputs: 4
Type of input: Set via appropriate wiring and jumper settings
Analog inputs:
Input range: 0-10V, 0-20mA , 4-20mA
Resolution at 0-10V 0-20mA: 14-bit (16384 units)
Resolution at 4-20mA: 3277 to 16384 (13107 units)
Conversion time: Synchronized to cycle time
PT100 inputs:
Input range: -200 to 600°C
Conversion method: Voltage to frequency
Resolution: 0.1°C
Conversion time: 200mS minimum per channel, depending on software filter type
Thermocouple inputs:
Conversion method: Voltage to frequency
Resolution: 0.1°C
Conversion time: 100mS minimum per channel, depending on software filter type
Analog Outputs:
Number of outputs: 4 (single-ended)
Output range: 0-10V, 4-20mA
Resolution: 12-bit (4096 units)
Conversion time: Synchronized to scan time
Environmental: IP20 / NEMA1
Operating temperature: 0° to 45°C
Storage temperature: -20° to 60° C
Relative Humidity (RH): 5% to 90% (non-condensing)
Dimensions: (WxHxD) 138x23x123mm
Weight: 279g