NB1H-63 3C 16A 10 kA double busbar

NB1-63H circuit-breakers are used in domestic installation, as well as in commercial and industry electrical distribution systems. Protection of circuits against short-circuit currents, protection of circuits against overload currents, switch, isolation.

Tripping C curve (5-10In): protection for resistive and inductive loads with low inrushcurrent.

3-pole, AC, 16A, C-curve, fork type busbar connection from below
Manufacturer’s code: 971871
10kA, IEC/EN 60947-2, IEC/EN 60898-1

Rated current In: 16 A
Poles: 3P
Rated voltage Ue: 230/400~240/415 V
Insulation voltage Ui: 500 V
Rated frequency: 50/60 Hz
Rated breaking capacity: 10 kA
Energy limiting class: 3
Pollution degree: 2
Rated impulse withstand voltage(1.2/50) Uimp: 6000 V
Dielectric test voltage at ind. Freq. for 1 min: 2 kV
Thermo-magnetic release characteristic: C

Electrical life: 4 000
Mechanical life: 20 000
Protection degree: IP20
Ambient temperature (with daily average≤35℃): -35...+70 ℃ (Special application please refer to P10 for temperature compensation correction)
Storage temperation: -35...+70 ℃
Terminal connection type: Cable/U-type busbar/Pin-type busbar
Mounting: On DIN rail EN 60715 (35mm) by means of fast clip device
Connection: From top and bottom

Auxiliary contact: Yes
Shunt release: Yes
Under voltage release: Yes
Alarm contant: Yes