Remote I/O-Expansion Adapter

The EX-RC1 Remote expansion adapter is used to link between Vision PLCs and I/O expansion modules via CANbus, up to 8 module to each adapter, 12/24V DC.

The EX-RC1 is run by a factory-installed application. The adapter can auto-detect digital I/O Expansion Modules. If the system includes analog modules, the application must be edited.

The EX-RC1 may either be snap-mounted on a DIN rail, or screw-mounted onto a mounting plate.

I/O module capacity: Up to 8 I/O modules can be connected to a single adapter
Power supply: 12VDC or 24VDC
Max. current consumption: 650mA @ 12VDC; 350mA @ 24VDC

Communication:
RS232 port: 1
Galvanic isolation: no
Voltage limits: ±20V
Cable length: Up to 15m
CANbus port: 1
Nodes: 60
Power requirements: 24VDC (±4%), 40mA max. per unit
Galvanic isolation: yes between CANbus and adapter
Cable type: Twisted-pair; DeviceNet® thick shielded twisted pair cable is recommended

Environmental: IP20/NEMA1
Operating temperature: 0°C...50°C
Storage temperature: -20°C...60°C
Relative Humidity (RH): 10% to 95% (non-condensing)
Dimensions (WxHxD): 80mm x 93mm x 60mm
Weight: 135g
Mounting: 35mm DIN-rail or screw- mounted