I/O Expansion Module 1 Loadcell Input 1 Digital In 2 Out

IO-LC1 offers 1 Loadcell input and 1 PNP (source) input and 2 short-circuit protected PNP (source) outputs with optional setpoint action that is defined via software settings.

The interface between the module and the OPLC is provided by an adapter.

The module may either be snap-mounted on a DIN rail, or screw-mounted onto a mounting plate.

1 Loadcell / Strain gauge input. Voltage range: ±20mV, ±80mV, execution: AC/DC, 1 Digital pnp input, 2 setpoint pnp outputs
12/24V DC

Module type: expansion
Power supply: 12 / 24VDC
Number of loadcell inputs: 1
Number of digital inputs: 1
Input type: loadcell and pnp (source)
Input current: 6mA@24VDC
Response time: 10mSec typical
Resolution: 24-bit

Number of outputs: 2 pnp
Output type: P-MOSFET (open drain)
Isolation: by relay
Output current (resistive load): 3A maximum per output
Short circuit protection: yes

Environmental: IP20/NEMA1
Operating temperature : 0…50°C
Storage temperature: -20…60°C
Relative Humidity (RH): 5% to 95% (non-condensing)
Dimensions (WxHxD): 80mm x 93mm x 60mm
Weight: 170 g
Mounting: Either onto a 35mm DIN-rail or screw- mounted